Product ID:INTERSHIELD PRORECO, PRA600/A1/A1
MSDS Date:11/11/1996
FSC:8010
NIIN:00N083546
Kit Part:Y
MSDS Number: CGRWG

COURTAULDS COATINGS INC

6001 ANTOINE DR
HOUSTON, TX 77091
US

Emergency Phone: 800-854-6813;800-424-9300(CHEMTREC)

Info Phone: 713-684-1563

Cage: 50411

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 713-684-1244; 908-964-2206

Cage: 0TZA3

DIETHYLENETRIAMINE (MIBK) KETOMINE ADDUCT WITH PHENYL

CAS: 68541-07-1

Fraction By Weight: 50-100%

OSHA PEL N/K

ACGIH TLV: N/K

DIETHYLENETRIAMINE

CAS: 111-40-0

RTECS: IE1225000

Fraction By Weight: 1-10%

OSHA PEL 1 PPM

ACGIH TLV: 1 PPM, S

B) REMOVE VOLATILES PRODUCED DURING CURE &

RTECS: 9999999ZZ

SURFACES COATED WITH THIS PRODUCT.

RTECS: 9999999ZZ

& FULL LENGTH FACESHIELD .

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: CAUSES NOSE AND THROAT
IRRITATION. EYE CONTACT: CAUSES EYE BURNS. SKIN CONTACT: CAUSES
SKIN BURNS. INGESTION: CAN RESULT IN IRRITATION OF THE MOUTH,
STOMACH TISSUE AND DIGESTIVE TRACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IN ALL CASES OF DOUBT OR WHEN SYMPS PERSIST, SEEK MED ATTN.
NEVER GIVE ANYTHING BY MOUTH TO AN UNCON PERSON. INHAL: REMOVE TO
FRESH AIR. IF DISCOMFORT IS PRESENT OR BREATHING IS ABSENT GET MED
ATTN IM MED. EYES: FLUSH IMMED W/PLENTY OF WATER FOR AT LEAST 15
MINUTES UNTIL IRRIT SUBSIDES. IF IRRIT PERSISTS, GET MED ATTN.
SKIN: FLUSH W/LARGE AMTS OF WATER. USE SOAP IF AVAIL. REMOVE
SEVERELY (SUPDAT)

Flash Point:106F,41C
Lower Limits:9999%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT, SPARKS, ELECTRICAL
EQUIP & OPEN FLAME. CLOSED CNTNRS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. IN ABSENCE OF ELECTRICITY, A WATER (SUPDAT)

Spill Release Procedures:CONTAIN SPILLED LIQUID W/SAND OR EARTH. DO NOT
USE COMBUSTIBLE MATERIALS SUCH AS SAWDUST. ABSORB SPILL W/AN INERT
MATERIAL (EG, DRY SAND OR EARTH) THEN PLACE IN A CHEMICAL WASTE
CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINER CLOSED. LOOSEN CLOSURE
CAUTIOUSLY BEFORE OPENING. STORE IN A COOL, WELL VENTILATED PLACE
AWAY FROM INCOMPATIBLE MATERIALS.
Other Precautions:KEEP AWAY FROM HEAT, SPARKS & FLAMES. PROTECT MATL
FROM DIRECT SUNLIGHT. GROUND & BOND CONTAINERS WHEN TRANSFERRING
MATLS. EMPTY CONTAINERS MAY RETAIN HAZARDOUS PROPERTIES. FOLLOW ALL
MSDS/LABEL WARNI NGS, EVEN AFTER CNTNR IS EMPTIED.

Respiratory Protection:USE A NIOSH APPROVED RESPIRATOR IN ACCORDANCE
WITH 29 CFR 1910.134 TO REMOVE PARTICULATES (AND VAPORS IF THERE IS
OVEREXPOSURE TO VAPORS GENERATED DURING THE PROCESSING OF THIS
PRDUCT.)
Ventilation:PRIVIDE SUFFICIENT VENT, IN VOLUME & PATTERN, TO A) KEEP
TLV OF HAZARDOUS INGREDS BELOW THE LIMITS SPECIFIED (ING 3)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 5)
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . AS
NEEDED, USE BODY PROTECTION TO AVOID CONTACT WITH PRODUCT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ: SPRAY (FOG NOZZLE IS PREFERRED) MAY BE USED TO COOL CNTNRS.
DECOMP & COMBUST PRODS MAY BE TOXIC. FIRST AID PROC: CONTAM CLTHG
(INCLUDING SHOES) & WASH BEFORE REUSE. IF IRRIT PERSISTS, GET M ED
ATTN. INGEST: IF SWALLOWED, DO NOT INDUCE VOMITING. KEEP AT REST.
GET PROMPT MED ATTN.

Boiling Pt:B.P. Text:9999F,5537C
Vapor Density:HVR/AIR
Spec Gravity:1.008
Evaporation Rate & Reference:SLOWER/ETHER
Appearance and Odor:LIQUID.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZARDOUS FUMES WHEN HEATED
TO DECOMPOSITION AS IN WELDING. FUMES MAY PRDCE CARBON MONOXIDE &
CARBON DIOXIDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.